摘要：It caIt can complete six-sided drilling, upper and lower grooving, side grooving and front milling;
全新升级 极致效率 | ND612D 六面数控钻孔中心###
核心亮点
Highlight
01
加工工艺 Processing technology
1、可完成六面钻孔、上下开槽、侧面开槽和正面铣型等工艺；
It caIt can complete six-sided drilling, upper and lower grooving, side grooving and front milling;
2、加工规格：长度：200-2800mm；宽度：30-1220mm；厚度：10-60mm。
Processing specifications: length: 200-2800mm; width: 30-1220mm; thickness: 10-60mm.
02
上加工单元 Upper processing unit
1、配置升级版对称双钻包和高速主轴；
Equipped with upgraded symmetrical double drill block and high-speed spindle;
2、钻头数量：垂直钻：19*2，X方向水平钻：3*4，Y方向水平钻：2*2。
Vertical drill: 19*2, X-direction horizontal drill: 3*4, Y-direction horizontal drill: 2*2.
03
高效钻孔 Three-in-one simultaneous processing
垂直钻与水平钻协调加工，减少空程与等待时间，有效提升钻孔效率。
Vertical drilling and horizontal drilling coordinate processing to reduce idle travel and waiting time, improving drilling efficiency.
04
极致钻孔 Efficient drilling of symmetrical holes
对称孔同时加工，效率倍增。
Processed simultaneously, doubling the efficiency.
05
组合式刀具 Side grooving, front grooving
上主轴锯铣一体组合式刀具，可完成侧面和正面开槽，适合线槽和灯槽工艺，方便快捷。
The upper spindle saw-milling integrated tool can complete the side and front grooving, suitable for wire trough and lamp trough technology.
06
下加工单元 Bottom processing unit
1、配置一组钻包和高速主轴；
Equipped with a drilliing block and high-speed spindle;
2、钻头数量：9。
Number of drills: 9.
07
长导轨双夹手 Long rail double gripper
1、5.5米超长行程导轨，可一次性抓取并加工超大板件，无需分段操作，减少换手时间；
5.5m long travel guide rail, can grab and process large panels at one time without segmented operation, reducing the hand-changing time;
2、内置三组定位杆，确保窄板定位精准。
Three sets of built-in positioning rods ensure accurate positioning of narrow panels.
08
控制软件 Control software
专业版操作软件，智能 AI 算法，规划最优路径，实现蛙跳式移动，最大化加工效率。
Professional operating software, AI algorithm, planning the optimal path, achieving leapfrog movement.
09
对接格式 Docking format
可人工编辑程序，也可对接 xml、bpp、ban、mpr 等多种格式。
The program can be edited manually, and can also be connected to various formats such as xml, bpp, ban, mpr, etc.
10
整体式机架 Integral body
采用机器人焊接、经退火、时效、喷丸、五面龙门加工中心成型处理，确保长期使用的刚性和抗变形能力。
Robot welding, annealing, aging, shot peening, and five-sided gantry processing center molding are used to ensure long-term rigidity and anti-deformation ability.
11
伺服及驱动 Servo and drive
采用绝对值伺服电机驱动，具备断电位置记忆功能，消除初始化流程，实现“开机即可加工”。
Absolute servo motor drive, with power-off position memory function, eliminating the initialization process, and achieving "start-up and processing".
12
进出料模式 Feeding and outfeed
可前进前出或前进后侧出。
Can be forward and front exit or forward and back exit.
13
碎屑输送系统（选配） Waste conveying system (optional)
可选碎屑输送系统，通过皮带将料仓底部的废料沿径向输送出去。
Optional waste conveying system, which conveys the waste at the bottom of the silo radially through a belt.
设备参数
Technical parameters
视频赏析
Video shows
来源：同花顺财经一点号
