摘要：最大锯切宽度3800mm，最大锯切厚度120mm，高效裁切，满足定制家具和批量生产需求。
高效裁切 独“锯”匠心｜NPL380D 后上料高速电脑裁板锯（双推手）###
板材规格
Panel specifications
最大锯切宽度3800mm，最大锯切厚度120mm，高效裁切，满足定制家具和批量生产需求。
Maximum cutting width 3800mm, maximum cutting thickness 120mm, efficient cutting, meeting the needs of customized furniture and mass production.
双推手
Twin Pusher
1、双推手由10组主工夹+2组副工夹组成，独立驱动；
The twin pusher consists of 10 sets of main clamps + 2 sets of auxiliary clamps, which are driven independently;
2、实现纵向和横向板材同时锯切，横向板材交错锯切。
Realize simultaneous sawing of longitudinal and transverse panels, and staggered sawing of transverse panels.
双横梁
Double beam
配置双横梁，锯切时可预上料，减少待料时间，提高加工效率。
Equipped with double beams, materials can be pre-loaded during sawing, reducing waiting time and improving processing efficiency.
主锯
Main saw
1、主锯功率：18.5(可选22)kw；
Main saw power: 18.5 (22kw optional) ;
2、伺服控制齿轮齿条传动，最高传动速度120m/min。
Servo-controlled rack and pinion transmission, maximum transmission speed 120m/min.
自动旋转（可选）
Automatic rotation
板材自动旋转装置。
Equipped with automatic panel rotation device.
锯座伺服升降（可选）
Saw carriage servo lifting (optional)
主锯升降伺服控制，实现锯片高度精准控制，支持开槽工艺。
Main saw lifting servo control to achieve precise control of saw blade height and support grooving process.
智能控制系统
Intelligent control system
集任务管理、程序导入、锯切编辑、条码管理和操作指导等功能于一体，简单易操作，与家具优化软件等无缝对接。
Integrates task management, program import, sawing editing, barcode management and operation guidance, which is simple and easy to operate and can be seamlessly connected with furniture optimization software.
01
进料方式 Feeding method
全自动后进料，可选正后方、左后方或右后方三种进板方向（三选一）。
Fully automatic rear feeding, with three optional board feeding directions: rear, left rear or right rear (choose one of the three)
02
四柱式/液压升降台（二选一）Four-post/hydraulic lift table (optional)
最大承载重量可达5吨，安全平稳。
Maximum load-bearing capacity: 5 tons.
03
侧靠定位装置 Side positioning device
在锯座上配置靠板装置，有效节约靠板对齐时间，窄长板加工更精准。
The saw carriage is equipped with a support plate device to effectively save the time of support plate alignment and make the processing of narrow and long boards more accurate.
04
主副工夹 Main and auxiliary grippers
配备一组主工夹和一组副工夹，独立控制，副工夹可根据板材宽度自动调整。
Equipped with a set of main grippers and a set of auxiliary grippers, which are independently controlled. The auxiliary grippers can be automatically adjusted according to the width of the panel.
05
锯片快换 Quick change for saw
快速更换锯片，便捷高效。
.Quickly replace the saw, convenient and efficient.
06
推料装置 Pushing device
根据系统指令，自动调节推板高度，最小可完成8mm工件上料。
According to the system instructions, the height of the push plate is automatically adjusted, and the minimum workpiece loading can be 8mm.
07
智能开料工作站 Intelligent cutting workstation
①多台NPL380D工作站与自动化物流系统、仓储系统集成，实现协同加工；
Multiple NPL380D workstations are integrated with automated logistics systems and warehousing systems to achieve collaborative processing;
②支持单张裁切及叠切功能，有效减轻劳动强度，提升加工效率。
Support single sheet cutting and stacking cutting functions, effectively reducing labor intensity and improving processing efficiency.
来源：同花顺财经一点号