激光封边高颜无缝|NB773M激光封边机

摘要：双胶锅（双色免清洗PUR和快速上熔胶）可同时容纳两种不同颜色或性质的胶水，无需频繁清洗胶锅即可切换胶水类型，节省了停机时间；

激光封边高颜无缝 | NB773M激光封边机###

无缝封边 Excellent in edge banding

核心亮点

Highlight

激光单元

Laser unit

利用高能矩形激光光斑熔接封边带，矩形光斑聚焦稳定，通过精密工序实现无缝封边。

Use high-energy rectangular laser spot to weld the edge banding. The rectangular spot has stable focus and seamless edge banding is achieved through precision processes.

双胶锅设计

Double glue pot design

1. 双胶锅（双色免清洗PUR和快速上熔胶）可同时容纳两种不同颜色或性质的胶水，无需频繁清洗胶锅即可切换胶水类型，节省了停机时间；

The double glue pot (two-color no-clean PUR and fast-melting glue) can hold two glues of different colors or properties at the same time. You can switch the glue type without frequent cleaning of the glue pot, saving time;

2. 上胶锅采用定量出胶和独立储胶设计，支持“即用即熔”，避免胶水反复加热导致的碳化。

The glue pot adopts quantitative glue dispensing and independent glue storage design, which supports "melting immediately after use" and avoids carbonization caused by repeated heating of glue.

双色免清洗PUR Two-color no-clean PUR

1. 双色胶锅可同时容纳两种不同性能或颜色的PUR胶水，通过智能控制系统实现瞬间切换，适应不同板材封边需求；

The two-color glue pot can hold two PUR glues with different properties or colors at the same time, and can be switched instantly through the intelligent control system to meet the edge banding requirements of different boards;

2. 深色板材封边时切换深色胶水避免胶线显色问题，浅色板材则使用透明胶，提升美观度，高强度粘接及环保特性，还解决了传统封边工艺的效率瓶颈与环保隐患。

When banding the edges of dark boards, switch to dark glue to avoid the problem of glue line color, and use transparent glue for light-colored boards to improve the aesthetics, high-strength bonding and environmental protection characteristics, and solve the efficiency bottleneck and environmental risks of traditional edge banding technology.

重型钢轨钢梁履带压料

steel beam presser by V-belt

重型钢压梁，高精度设计，履带压料稳固，确保板材输送稳定，兼具优异刚性与耐用性。

Heavy-duty steel pressure beam, high-precision design, and top pressure by v-belt to ensure stable sheet material transportation, with excellent rigidity and durability.

重型一体式机架&钢轨

Integrated frame & rails

经机器人焊接、自然时效、退火、喷丸，龙门加工中心一次成型等工艺，提升整体稳定性。

Through robot welding, natural aging, annealing, shot peening, gantry machining center one-step forming and other processes, the overall stability is improved.

高速四刀仿形跟踪

High-speed corner rounding

四刀仿形跟踪系统配备四组独立高频电机，同时对板材四角进行仿形修圆角，消除边缘毛刺，使封边接缝圆滑不刺手，有效提升了封边精度、效率和美观度。

High speed corner rounding system equipped with four independent high-frequency motors, which can simultaneously profile and round the four corners of the plate to eliminate ed.

重要配置

Important Configuration

预铣

Pre-milling

通过高速旋转的金刚石刀具对板材边缘进行铣削，去除切割后的毛刺和残留胶层，避免了封边带与板材接触面的杂质干扰，确保胶水渗透均匀，提升封边粘合强度。

Milled by a high-speed rotating diamond tool to remove the burrs and residual glue layer after cutting, avoiding the interference of impurities on the contact surface between the edge banding and the plate, ensuring uniform glue penetration and improving the edge banding bonding strength.

伺服送带

Servo feeder

双四通道伺服送带，满足多种花色板材快速切换需求。

Double 4-roads servo feeder, meet the needs of fast switching of various color plates.

双导轨齐头(773M) /伺服水平齐头(773MF)

End cutting

通过精密的直线导轨运动，采用靠模自动跟踪和高频高速电机快速切削结构，保证切断面平整光滑。

Through precise linear guide motion, automatic tracking of the mold and high-frequency and high-speed motor fast cutting structure, the cut surface is guaranteed to be smooth.

两组修边

Two sets of trimming

1.粗修采用靠模和高频高速电机，用于修整板材上下多余的封边材料，保证上下部分平整光滑；

Rough trimming uses a template and high-frequency high-speed motor to trim excess edge banding materials on the upper and lower parts of the plate to ensure that the upper and lower parts are flat and smooth;

2.精修采用R修边刀，为板材封边条修出弧度。

The R trimming knife is used for fine trimming to create a curvature for the edge banding of the board.

双水平刮边

Double horizontal scraping

设备配置两组水平刮边，消除修边痕迹，让板边光滑整洁，提升封边美观度。

Equipped with two sets of horizontal scrapers to eliminate trimming marks, make the board edges smooth and tidy, and improve the aesthetics of edge sealing.

平刮装置

Scraper

刮落板材与封边带上残留物，保证板材与封边带的平整清洁。

Scrape off the residue on the board and edge banding to ensure that the board and edge banding are smooth and clean.

智能控制系统

Intelligent control system

智能控制系统，人性化操作界面，运行参数（如温度、速度、压力）可视化，记录历史数据，实时检测封边异常。

Intelligent control system, user-friendly operation interface, visualization of operating parameters (such as temperature, speed, pressure), recording of historical data, and real-time detection of edge banding anomalies.

技术参数

Technical parameters